πŸ’§

WellDepthData.com

USGS National Groundwater Atlas

Home / States / Maine
STATE REGISTRY: ME OFFICIAL USGS LOGS 2026 EDITION

Maine Water Well Depth & Drilling Cost Guide

Authoritative hydrogeological intelligence for Maine. Regulated by the Maine Department of Health and Human Services - Drinking Water Program. The statewide median drilling depth is 260 feet (ranging 70–600 ft) with an average drilling cost of $50 per foot ($36 to $80/ft).

πŸ“Š View County Breakdown πŸ’° Turnkey Cost Breakdown πŸ“‹ Get 3 Local Driller Quotes
πŸ’‘

Quick Hydrogeological Fact Sheet: Maine

To reach potable water in Maine, residential wells require drilling an average of 260 feet deep. Total turnkey installation costs average $14,200 USD for a completed 6-inch casing well, 1.5 HP submersible pump, pressure tank, and state permits. The standing static water table sits at approximately 35 feet below surface level, producing a reliable average flow rate of 10 GPM across the primary Crystalline Bedrock Aquifers.

ME Median Depth πŸ“
260 ft
Typical Range: 70 - 600 ft
Avg Cost per Foot πŸ’΅
$50 /ft
Drilling + 6" Sanitary Casing
Static Water Level 🌊
35 ft
Depth to standing water table
Avg Turnkey Well Cost 🏷️
$14,200 USD
Includes pump, tank & permits

Maine County-Level Well Logs & Average Depths

Official USGS hydrogeological monitoring stations, static levels, and driller completion records.

2 Key Counties Logged
County Name Median Depth (ft) Avg Cost / Foot Typical Yield Primary Aquifer Local Action
Cumberland County 250 ft $48 /ft 11 GPM
Glacial Sand / Granite Bedrock
York County 270 ft $52 /ft 9 GPM
Crystalline Bedrock

πŸ’° Estimated Turnkey Cost Itemization in Maine

Component-by-component breakdown for a standard residential water well (260 ft average).

TURNKEY ESTIMATE
System Component Specification in Maine Unit Cost Estimated Subtotal
Borehole Drilling & Sanitary Casing 260 ft depth with standard 6" PVC/Steel Casing & Drive Shoe $50 /ft $13,000 USD
Submersible Pump & Drop Pipe 1.0 HP – 1.5 HP Stainless Submersible Pump with 12-gauge electrical drop cable Turnkey Pump Unit $2,250 USD
Pressure Tank & Control Switch 40-gallon Captive Air Pressure Tank, 40/60 PSI Pressure Switch & Gauge Standard Assembly $1,200 USD
State Permits, Sanitary Grouting & Lab Water Testing Mandatory Maine Department of Health and Human Services - Drinking Water Program permit, bentonite surface seal, and EPA drinking panel State Fee + Lab $600 USD
TOTAL ESTIMATED TURNKEY INVESTMENT Includes excavation, drilling, plumbing hookup, and water inspection $14,200 USD
πŸ›οΈ

Maine Aquifers & Subsurface Geology

Fractured granite, metamorphic schist, glacial till and eskers

Primary Formations:
Crystalline Bedrock AquifersSand and Gravel Glacial Aquifers
πŸ§ͺ

Water Quality & Recommended Filtration

Hardness Level: 65 PPM
Typical pH: 6.7
Common Minerals & Trace Elements:
Arsenic (naturally occurring)RadonUraniumIron
Recommended Filtration: Specialized Arsenic & Radon Water Treatment System

βš–οΈ Maine Well Drilling Regulations & Legal Setbacks

Septic Tank Setback:
100 Feet Minimum
Property Line Setback:
20 Feet
State Permit Fee:
$150 USD
Licensing Authority:
Maine Department of Health and Human Services - Drinking Water Program
MAINE COST ESTIMATOR

Calculate Drilling Cost in Maine

Pre-loaded with Maine median depth (260 ft) and average cost ($50/ft).

Target Depth: 260 ft
Cost per Foot (ME): $50 /ft
Estimated Turnkey Investment (ME):
$14,200 USD
Get Exact Local Quote βž”
COMMONLY ASKED QUESTIONS

Frequently Asked Questions: Drilling Wells in Maine

1. How deep do you usually have to drill for water in Maine?

Across Maine, the median residential water well is drilled to 260 feet. However, shallow alluvial wells can hit water as high as 70 feet, while deep bedrock or limestone aquifer wells may require drilling down to 600 feet to reach sufficient pressure and yield.

2. How much does a complete water well cost in Maine?

On average, homeowners in Maine invest $14,200 USD for a complete turnkey system. Drilling alone costs $50 per foot (ranging $36–$80/ft), while submersible pumps, pressure tanks, state permit fees ($150), and electrical hookups comprise the remaining balance.

3. What is the required setback from septic tanks in Maine?

State health mandates overseen by the Maine Department of Health and Human Services - Drinking Water Program require a minimum separation distance of 100 feet from any septic tank, leach field, or potential contamination source, plus at least 20 feet from adjacent property boundaries.

4. What is the groundwater quality like in Maine?

Wells in Maine typically yield water with a hardness reading around 65 PPM and an average pH of 6.7. Key minerals present in natural groundwater include Arsenic (naturally occurring), Radon, Uranium, Iron. The recommended standard filtration configuration is: Specialized Arsenic & Radon Water Treatment System.

πŸ—ΊοΈ Neighboring & Regional Groundwater Guides

New Hampshire NH
Median: 285 ft | Avg: $52/ft
Aquifer: Crystalline Bedrock Aquifers
Massachusetts MA
Median: 270 ft | Avg: $54/ft
Aquifer: Cape Cod Aquifer System
LICENSED & BONDED CONTRACTORS

Request 3 Free Water Well Drilling Estimates in Maine

Connect with state-certified drilling contractors licensed by Maine Department of Health and Human Services - Drinking Water Program. Compare pricing, pump sizing, and warranty terms with zero obligation.